Home > Product solutions > Textile industry > Textile industry
  • Product Name: HM-392 denatured starch
  • Product introduction:
    Mature process, stable performance, wide use range, high consistency, low viscosity, good fluidity and strong permeability HM-392 modified starch is made from the raw starch of high quality corn, and the modified starch is produced by the m......
  • Detailed Introduction
  Mature process, stable performance, wide use range, high consistency, low viscosity, good fluidity and strong permeability
HM-392 modified starch is made from the raw starch of high quality corn, and the modified starch is produced by the mature denaturation process. HM-392 modified starch has a stable viscosity and excellent serous membrane properties. The slurry has better permeability and adhesion to fiber, which increases the fabric's fabric.
Use:
Textile sizing can be used in warp sizing of pure cotton, polyester and cotton. It is usually used in mixing with chemical pulp. It has good permeability to fine branches and high density varieties.
 
Performance:
1, HM-392 denatured starch is a modified starch produced from high quality corn and more than 10 years of production experience to ensure long-term stability of its products.
2, the viscosity of the modified starch is very low, and the stability of thermal viscosity is very high, so the stability of the viscosity of the slurry tank is guaranteed and the sizing rate of the yarn is stable.
3, HM-392 modified starch has good permeability, good slurry fluidity, convenient for sizing operation, easy to divide the yarn in the head and less broken ends of the sizing.
4, HM-392 denatured starch serous membrane is tough, and has good wear resistance. It is suitable for the new high speed loom.
5. Using the process of deep oxidation denaturation, it has good adhesion to cotton fiber.
6. The slurry is high concentration and low viscosity. It can be used with all kinds of slurry.
7. Under the condition of hot pulp, it is not easy to knot the pulp, and it is not easy to form the pulp spot.
8, the starch protein content is low, the slurry is not easy to bubble.
9. The fabric with HM-392 denatured starch sizing is easy to degrade after the process, and the wastewater is easily decomposed, which meets the requirements of environmental protection.
 
Pulping method:
Adding a certain amount of the pulp barrels of water, start the blender, add the process of HM-392 modified starch and other additives, textile slurry, mixing evenly, slowly heated to 98 DEG C, to all kinds of slurry is completely dissolved after holding for 30 minutes, the total volume to adjust the slurry viscosity measurement process, set aside.
 
Quality indicators:
Appearance: white powder
The moisture is less than 15%
PH: 6-8
Viscosity: 4 - 12mpa.s (injection: viscosity determination condition 6% concentration using NDJ-7 type rotary viscometer at 95 C for 30 minutes)

CONTACT US

Fax : 0769-88287332        
E-mail : hmdfkj@126.com
Add : Machong Dadao Road,
Machong Town,Dongguan,
Guangdong, China

Guangdong Hui Mei Starch Technology Co., Ltd.Guangdong ICP 12,062,607th No. 1 Copyright©all Rights Reserved